Filter By:
Accessories/Parts

$12.99
CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine.

$13.99
Add an Alfine hub, cog, spokes, and a rim to this Shimano Internally Geared Hub Small Parts Kit, and you're ready to rock.
- Alfine hubs are packaged without small parts and require this kit plus a cog
- Nexus hubs are packaged with small parts and cogs and do not require an additional small parts kit
- For 11-Speed Hub
- Includes CJ-S700 Cassette Joint for Vertical Dropouts
*Cassette joint does not fit Di2 Alfine hubs

$18.99
The 4.5-inch peg features a full 4130 core with a long-lasting, fast-sliding, plastic sleeve.
- Sold individually
- 14mm with 3/8” adapters only
- Replacement sleeves sold separately
- 4.5" (length) x 1.5" (outer diameter)
- 4.5 oz (9 oz for a pair)

$8.00 - $50.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.

$39.99
- Syntace x-12 Rear axle standard creates a stiffer and lightweight rear end
- Syntace x-12 Parts are only compatible with frames that have Syntace x-12 Dropouts

$9.00
This outer receiver unit works with the CJ-S700 Cassette Joint Unit for Shimano Alfine SG-S700 internally geared hub. This part can become worn, cracked, or torn, exposing the shift cable and possibly other components to unwanted dirt, water, mud, you name it. You don't want that.

$73.50
Chris King never settles for anything but perfect, so you shouldn't either. This replacement axle replaces a damaged or worn axle on Small Diameter (SD) Chris King ISO front hubs designed to work with Quick Release skewered fork ends. To convert your ISO SD hub from a different axle standard to QR, you'll need this axle, along with the following parts:
- ISO SD QR Front Axle End, Manufacturer's Part Number (MPN): PHB308
- 9mm Front Axle Adjustment Cone, MPN: PHB701

$4.99
When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

$5.00
Surly Rim Strips have one job and they do it well. They cover the cutouts in your rim and — if you're running a tube — they protect it from spoke heads and other sharp matter (okay, so maybe they have TWO jobs but they do them both really well.) Rim strips are crucial and should be used with all Surly rims. Ours come in an array of colors so you can really "express yourself."
Surly Rim strips are available in two different materials: PVC and Nylon. PVC is great if you plan on only running tubes. However, if there's any part of you that wants to try this tubeless thing you've been hearing about, Nylon strips are just the ticket. They're thinner and offer minimal stretch so they stay put and lay nicely inside the rim to provide a secure seal. Plus, they're lighter which we all know means you'll go faster… maybe.

$16.00
Compatible with straight valve hole Hugo 52 rims and designed to fit 7.5 - 8.5mm valve holes. Sold as a pair.
Identifying your Hugo rim and selecting the correct valve stem:
Stepped Hugo rims have a larger diameter valve hole on the interior of the rim, and a narrower hole on outside of the rim.
Quick tip: don't remove your tire if you don't have to. If your Hugo rim decal reads:
MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this valve. For "Stepped" valve hole Hugo use part AS0105 - Valve Stem pair, Schrader, 32mm, 14mm base.

$63.95
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's Standard Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!

$90.00
The EVOC MTB WHEEL COVER protects the bike rims during transport and the surrounding area from dirt.
- Fits up to 29-inch wheels
- Axle protection
- Necessity pocket (separate)
- Carry handles
- 2 bags

$125.00
Transport your wheels safely and stylishly with the EVOC ROAD BIKE WHEEL CASE. Perfectly adapted, the cases also fit in the wheel bags of our bike bags BIKE TRAVEL BAG and BIKE TRAVEL BAG PRO.
- Axle protection
- Necessity pocket (separate)
- Carry handles
- 2 bags included

$110.00
- Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed (Red), Campagnolo 10/11 Speed (Blue)
- Material: Aluminum

$136.00
This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation.
The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included.
- 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center
- Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels
- Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels
- Includes cassette spacer
- Material: Aluminum

$7.00
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm.
Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.
Page 1 of 8
Next page